The servo reducer is the weight of the gear transmission of the servo reducer. Generally, the weight of the Liyi electromechanical gear has a great relationship with its material and heat treatment hardness. There are so many types and brands of servo reducers? Do you know how to choose? If you don’t know. It’s okay, reading today’s sharing may be of some help to you.
The following aspects should be considered when selecting a reducer.
1. Determine the required reduction ratio. Generally, you will see the introduction of some reducers on some shopping websites, which will indicate some product information. Speed ratio should of course be used as an important basis for your selection. If there is no speed ratio you need in the servo motor, you can also customize it.
2. After we determine the speed ratio, we must multiply the speed ratio by the rated torque of the servo motor that we have selected. The torque information is also available on the product details. In principle, the value obtained should be less than the rated output torque of the similar reducer provided in the product catalog. At the same time, the overload capacity of the drive motor and the larger operating torque required in practice should also be considered. The required greater working torque should be less than 2 times the rated output torque. After satisfying the above conditions, please choose the small size of the servo reducer brand, and the cost of the small size reducer is relatively low.
3. It is also necessary to determine the return gap of the product. Generally, the smaller the return gap, the higher the accuracy. But then the cost will be higher.
4. There is another point to remind, it depends on whether the weight of the servo motor you choose matches the reducer. Because some reducers have requirements for the weight of the motor.
The above are some selection methods. Will they make your selection more clear?
Apr 11, 2022
Apr 06, 2022