欢迎访问Fuzhou Lexmark Electromechanical Co., Ltd.
联系热线:

18059012119

0591-83251213

How to use lubricating oil for low backlash worm gear reducer

2021-10-27

The low backlash worm gear reducer is a transmission machine with a compact structure, a large transmission ratio, and a self-locking function under certain conditions. It is one of the commonly used reducers.

1. Regularly check whether the installation foundation, seals, transmission shaft, etc. are normal.

2. In normal use, it is necessary to check the oil level of the lubricating oil frequently (observed through the oil window), and the high temperature of the lubricating oil should be less than 85 degrees Celsius. If the temperature rise of the oil changes abnormally and abnormal noise occurs, it must be stopped immediately for inspection. , after troubleshooting, can continue to use.

3. Replacement of new spare parts must be run-in and load test before formal use.

4. Do not gravitationally hammer the reducer casing to avoid damage.

Use inspection and replacement of lubricating oil for low backlash worm gear reducer:

1. The working environment temperature of the reducer is -40- plus 40 degrees Celsius. When the ambient temperature is lower than 0 degrees Celsius, the lubricating oil must be heated to above 0 degrees Celsius or the lubricating oil with low freezing point must be used before starting.

2. For the first use or new replacement of the worm pair or reduction gear pair, replace the lubricating oil after 150-400 hours of operation, and the subsequent oil change interval is less than or equal to 4000 hours.

3. Regularly check the quantity and quality of the oil, keep enough lubricating oil, and replace the oil mixed with impurities or deteriorated in time.

4. The amount of oil injection must be in accordance with the requirements. It is forbidden to mix oils of different grades, and oils of the same grade but different viscosities are allowed to be mixed.

5. Regularly check the quantity and quality of the oil, keep enough lubricating oil, and replace the oil mixed with impurities or deteriorated in time.

Reducer parts processing center spot supply: gear processing, gear motor, worm gear, continuously variable transmission, gear commutator, worm gear reducer, screw lift, micro cycloid reducer, precision planetary reducer, spiral cone Gear reducer, helical gear hardened surface reducer, reducer parts processing.

 



Related News

Product Recommended

  • PB single stage high ...
  • FA single-stage plane...
  • SDL double-stage disc...
  • SBT single-stage corn...
  • WEO low backlash worm...
  • GT double-stage hollo...