2021-09-06
Liming reducer is a kind of transmission developed on the basis of cycloidal pinwheel transmission. It is composed of involute cylindrical gear planetary deceleration mechanism and cycloid pin wheel planetary deceleration mechanism. The involute planetary gear is connected to the camshaft as a whole, as the input of the cycloid pin wheel transmission part.
The camshaft drives the cycloid gear to make an eccentric movement. The cam shaft rotates clockwise for one turn, and the cycloid gear will move one tooth in the counterclockwise direction.
※The product characteristics of Liming reducer-high reliability, high rigidity, high precision, large torque
1. Adopt dual support support mechanism and pin
1. The product will not be damaged even when a torque up to 5 times the rated torque is applied.
2. The torsion stiffness is very large.
3. Small backlash (1 arcmin)
2. Large carrying capacity
1. Two cycloidal wheels design, multi-tooth meshing increases strength.
2. Adopt oblique ball bearings and increase the bearing span to increase the rigidity of the output end.
3. Pursue simple use
1. It has been sealed with grease, protection grade IP65, free of replacement and protection.
2. The use of coupling and motor flange makes the installation of the motor very simple.
※Introduction of Liming reducer——RCM6 high precision cycloid reducer
Output form: the output end is a hollow shaft
Input form: input flange
High precision reducer
Output platform support bearing: angular ball bearing
Reduction ratio: 1/121, 1/145 two options
Accuracy: Ps≤2 arc minutes, P0≤4 arc minutes, P1≤6 arc minutes
Efficiency: up to 85% or more
Taiwan's Liming factory has newly developed a high-precision cycloid RV reducer, which is mainly used on robotic arms. To meet the large demand of Industry 4.0, the production line is currently available for mass production.