The hollow rotating platform is driven by a motor to realize the automation of angle adjustment. Finished worm gear or gear drive, with unlimited angle adjustment. The precision shaft system design makes it have the characteristics of high precision and large load; the stepping motor and the transmission part are connected by imported high-quality elastic couplings, which eliminates the space and processing form and position errors. The scale of the outer ring of the rotating desktop is intuitive; the standard interface is convenient for signal transmission; the manual wheel configuration, electronic control and manual operation.
The hollow turntable and the planetary reducer are the same type of reducer, which is a new upgrade of the rotating load device. Hollow rotating platform integrates the advantages of servo motor, cam separator and direct drive motor, with high efficiency, high precision, high rigidity and high cost performance. Below isHollow rotating platformThe advantages, let us analyze it in depth!
1. According to the instant connection, the credibility can be improved and the cost can be controlled
The necessary equipment consoles and mechanical arms can be immediately installed on the rotating platform. Compared with the use of belt pulleys and other mechanical parts, the time and cost of mechanical design, part configuration and belt state adjustment can be reduced.
2. Motor equipment
Stepper motors or servo motors can choose to install various well-known corporate brands.
3. High-precision positioning without gaps
There is no backlash, the accuracy level is not more than 1mln, and the accuracy level of the positive and negative poles can be used repeatedly up to 5 arc seconds.
4. Large-size hollow structure
Wiring and pipe threading are more convenient and simple, especially in the natural environment where wiring and pipe threading are complex.
The hollow rotating platform is a new type of reducer. According to different reduction ratios, different output speeds can be obtained, which can be used in various rotary motion occasions. It can replace DD motor and cam distributor. There is a balance between the two, the repeat positioning accuracy is less than 5 seconds, the motor is easy to configure, and the load is stable. It can be used with AC servo motors or stepping motors for any angle division, which can not only meet the digital control that the divider cannot achieve, but also the positioning accuracy. Comparable to DD motors.