The bevel gear reducer is a three-stage helical-bevel-helical gear reducer motor with high double torque power and long life gears. Equipped with foot device, flange device and shaft mounting type. Gear reducer is a combination of reduction motor and large reducer. No couplings and adapters are required, and the structure is compact. The load is spread on the planetary gears, so the load capacity is higher than that of a general helical gear reducer. Meet the needs of high torque output in a small space.
1. Reliable industrial gear transmission components;
2. Combining reliable structure with multiple inputs to get used to special usage requirements;
3. With high power transmission ability and compact structure, the gear structure is determined according to the modular design principle;
4. Easy to use and protect, configure and select materials according to technology and engineering conditions;
5. The torque scale ranges from 36,0000Nm to 1,200,000Nm.
Reducers are widely used in the fields of machinery and equipment such as petroleum, chemical industry, plastics, rubber, food, textiles, etc. Among them, the gear reducer is a relatively widely used model. However, the gear reducer will have various failures after a long time of use, and excessive oscillation is a common problem. What factors can cause excessive oscillation of the bevel gear reducer?
The first factor is the large oscillation of the reducer base. The oscillation frequency of the frame directly affects the speed of the reducer, so if the frame oscillates too much, it will cause the reducer to become unstable during operation.
The second factor is that the transmission machine is out of adjustment. The imbalance of the transmission of the gear reducer is mainly manifested in the poor calibration line between the motor and the driver. Therefore, as long as the calibration line is adjusted to rehabilitate the connection between the driver and the motor, the operation of the motor bearing can be stabilized.
Factor three, bearing wear is too large, this is a very common factor that causes excessive vibration of the reducer, mainly because the bearing is working for a long time or the clearance is too large, which causes the bearing to damage the bearing due to friction and heat. In the meantime, the sliding bearing is easy to cause damage to the bearing, so pay special attention to the lubrication of the bearing during maintenance.