Electromagnetic Brake Motor

Features: Suitable for emergency braking operation of single-phase or three-phase motors. When the power is cut off, the motor will stop instantly and have the load holding power.

Feature:Applicable to single-phase or 3-phase emergency brake.

When power if interrupted, motor will instantly stop and maintain the loading.

Motor General Specification

Insulation resistance: Measured with a DC500V high resistance meter between the coil and the housing of the motor, and its value is above 100MΩ.

Insulation withstand voltage: 50Hz or 60Hz, 1.5KV is applied between the coil and the shell of the motor for 1 minute without any abnormality. Temperature rise: measured by resistance method after rated continuous rotation of the motor, the temperature rise value is below 80°C.

Insulation class: Type B (130℃)

Protection level: wire type IP20.

Operating temperature: -10℃~+50℃ (capacitor continuous operation motor -10℃~+40℃) (non-freezing state). Operating humidity: 85%below (non-condensing state).

Forced fan (optional): Voltage AC (110V, 220V) provides forced heat dissipation of the motor (under power supply state).

The installation is also different due to different motor output shafts.

Different installation methods result from different output shafts of motor.