Induction motor features: suitable for single-phase and three-phase motors continuous continuous rotation in one direction.

Characteristics of induction motor:Applicable to single-phase motor in single direction continuous operation.

Reversible motor features: suitable for single-phase and three-phase motors frequent forward and reverse operation (30 minutes rated).

Characteristics of reversible motor:Applicable to 3-phase motor frequently cw/ccw operation(30 minutes rating).

Motor General Specification

Insulation resistance: Measured with a DC500V high resistance meter between the coil and the housing of the motor, and its value is above 100MΩ.

Insulation withstand voltage: 50Hz or 60Hz, 1.5KV is applied between the coil and the shell of the motor for 1 minute without any abnormality. Temperature rise: measured by resistance method after rated continuous rotation of the motor, the temperature rise value is below 80°C.

Insulation class: Type B (130℃)

Protection level: wire type IP20, terminal box type IP54.

Operating temperature: -10℃~+50℃ (capacitor continuous operation motor -10℃~+40℃) (non-freezing state). Operating humidity: 85%below (non-condensing state).

Insulation impedance: Measure with DC500V high resistance gauge between the coil and casing of motor, the reading is 100M or higher.

Insulation resistance to pressure:Apply 50Hz or 60Hz,1.5V between the coil and casing of motor for one minute without irregularity resulted.

Temperature rise:To specify by resistance method after motor reaches rated operation, temperature is less than 80℃.

Insulation:B(130℃)

Protection:Motor with conductive wire is IP20;motor with terminal box is IP54.

Operating temperature:-10℃~+50℃(Capacitor operation motor-10℃~+40℃)(No freezing)Operating humidity:85%or less(No condensation)