Cross steering gear reducer

Product advantages:

It adopts a full series of modular design and manufacture, low noise, high torque and high efficiency.

All series are made of modulated design and production, low noise, high torque, and high efficiency.

The spiral bevel gear can be simply installed in any mechanical location, and the direction can be selected by the customer in 24 variations of up, down, left and right.

Bevel gear reducer can be installed at all machinery, 24 various directions are basis of up, down, left and right.

The gear transmission efficiency can reach 95%, and the speed ratio is divided into two types: 1:1 and 1:2.

Gear transmission efficiency is available to 95%,ratio 1:1 or 1:2 can be chosen.

Use high-quality lubricating grease.

Using high quality lubricant.

Chassis: High rigidity FC cast iron casting.

Casing:High rigid FC cast iron.

Gear: The gear is made of high-quality and high-purity alloy steel SCM415 carburized and hardened.

Oil seal: oil seal with double sealing lip, both dustproof and oil leakage prevention.

Spindle: The shaft is made of medium carbon steel S45C, which can carry high loads. Bearing: Equipped with ball bearings with heavy load capacity.

Features:

Model: TH15-TH40

Reduction ratio: 1:1 and 1:2

Lubricating oil use: Proper use of lubricating oil can exert the efficiency of the steering gear and increase the operating life. After long-term use, the lubricating oil needs to be replaced every year or 2400 hours. Grease can be used for short-term operation.