Right-angle reducers are used in a variety of rotary motion occasions. Can replace DD MOTOR and cam divider. It is a revolutionary product in the rotary motion mechanism. A balance is achieved between the two, the repeat positioning accuracy is less than 5 seconds, the motor is easily configured, and the load is stable
Hollow right-angle reducer: Right-angle reducer is used in a variety of rotating motion occasions. Can replace DD MOTOR and cam divider. It is a revolutionary product in the rotary motion mechanism. It strikes a balance between the two, repeat positioning accuracy is less than 5 seconds, the motor is easily configured, and the load is stable. It can be used with AC servo motor or stepping motor to do any angle division, which can not only meet the digital control that the divider cannot achieve, but also the positioning accuracy. Comparable to DD motors.
Hollow structure The turntable of the right-angle reducer is a hollow structure, and the servo motor is connected to the side, which is convenient for the installation of the air pipe and the wire in the jig.
High repeat positioning accuracy right angle reducer adopts single-stage helical gear reduction method to increase output torque, gear accuracy grade is below 5, plus a flexible adjustment mechanism, the backlash is controlled by changing the center distance of the two gears, making it hollow The empty return of the rotating platform is extremely small, and the repeat positioning accuracy is less than 5 arc seconds.
The turntable of the high-rigidity right-angle reducer is supported by a set of precision cross roller bearings. The rollers in the bearing are staggered by 90 degrees, and the diameter of the rollers is slightly larger than the size of the raceway between the inner ring and the outer ring of the bearing, making the cross roller There is a pre-tightening force between the inner and outer rings and the rollers of the bearing, so the servo rotating platform turntable supported by the bearing can withstand various moments such as radial, axial and overturning, and its rigidity is more than 10 times that of traditional bearings.
After the high-rotation accuracy right-angle reducer is assembled, the outer diameter and end face of the turntable are ground again with the cross roller bearing of the platform as the center of rotation (standard grade is fine turning) to ensure the coaxiality and parallelism of the turntable Equal form and position tolerance.
Arbitrary configuration of the motor. The right-angle reducer can flexibly change the size of the interface by customizing the flange and input shaft hole, which is suitable for connecting any brand of servo motor.