Liming reducer is a transmission developed on the basis of cycloidal pinwheel transmission. It is composed of involute cylindrical gear planetary reduction mechanism and cycloidal pinwheel planetary reduction mechanism. Involute planetary gear and camshaft Connected into one, as the input of the transmission part of the cycloid pinwheel.
The camshaft drives the cycloid gear to do eccentric motion. The camshaft rotates clockwise for one turn, and the cycloid gear will move 1 tooth in the counterclockwise direction.
※Product features of Liming reducer - high reliability, high rigidity, high precision, high torque
1. Adopt double support support mechanism and pin
1. The product will not be damaged even when a torque as high as 5 times the rated torque is applied.
2. The torsional stiffness is very large.
3. Small backlash (1 arcmin)
2, large carrying capacity
1.2 cycloid wheel design, multi-tooth meshing increases strength.
2. Adopt oblique angle ball bearings and increase the bearing span to increase the rigidity of the output end.
3, the pursuit of simple use
1. Grease has been sealed, protection grade IP65, free of replacement and protection.
2. The use of coupling and motor flange makes the installation of the motor very simple.
※Introduction of Liming reducer——RCM6 high-precision cycloid reducer
Output form: the output end is a hollow shaft
Input form: input flange
High precision reducer
Output platform support bearing: angled ball bearing
Reduction ratio: 1\/121, 1\/1452 optional
Accuracy: Ps is less than or equal to 2 arc minutes, P0 is less than or equal to 4 arc minutes, P1 is less than or equal to 6 arc minutes
Efficiency: up to 85 percent or more
Taiwan Liming factory newly developed high-precision cycloid RV reducer, which is mainly used in robotic arms. In order to meet the large demand of Industry 4.0, the production line is now ready for mass production.